The function of oil grooves on sliding bearings

1、 Protective bearings

After long-term use, sliding bearings will experience wear, and the particles generated by wear will enter the interior of the bearings, accelerating their wear and even leading to bearing failure. The oil groove can form a layer of oil film on the bearing, trapping particles generated by wear between the oil films, preventing particles from entering the interior of the bearing, thereby protecting the normal operation of the bearing.

2、 Reduce friction

Sliding bearings require lubrication with lubricating oil to reduce friction during operation. The oil groove can form a storage space for lubricating oil on the bearing, increase the storage capacity of lubricating oil, fully lubricate the bearing surface, reduce friction coefficient, reduce energy loss, and improve mechanical efficiency.

3、 Reduce noise

Machines that rotate at high speeds will produce a certain amount of noise, and reasonable use of oil grooves can reduce the noise generated by friction and vibration, and improve the working environment.

4、 Extend service life

Sliding bearings may wear due to temperature rise and poor lubrication during operation, and the oil groove can ensure the circulation of lubricating oil, making the bearing surface fully lubricated and reducing wear. At the same time, the oil groove can reduce the operating temperature of the bearing and extend its service life.

In short, the oil groove on the sliding bearing can effectively protect the bearing, reduce friction, reduce noise, and extend its service life. In the use and design of machinery, fully utilizing the role of oil grooves can effectively improve the efficiency and service life of the machinery.

Dimensional standards for oil tanks

In the international standard classification, the dimensions of oil tanks involve bearings, commercial vehicles, facilities in buildings, length and angle measurements, kitchen equipment, fasteners, machine tool installations, shafts and couplings, petroleum, petroleum products and natural gas storage and transportation equipment, textile machinery, machine tools, road vehicle internal combustion engines, lubrication systems, rubber and plastic products, cutting tools, machines, devices, equipment characteristics and design, technical drawings Manufacturing forming processes, steel products, shipbuilding and offshore structures integration, chip free processing equipment, insulation, semiconductor materials, wood, logs and sawn timber, pipeline components and pipelines, water quality, packaging materials and accessories, packaging machinery, handheld tools, aerospace fluid systems and components, ground service and maintenance equipment, metallurgical equipment, motorcycles and motor bicycles, agricultural machinery, tools and equipment, optical equipment Transmission and distribution networks, fasteners for aerospace manufacturing, woodworking equipment, earthmoving machinery, materials for aerospace manufacturing, springs, industrial automation systems, bottles, small cans, jars, welding, brazing and low-temperature welding, tires, steel rails and line components, coatings and related processes for aerospace manufacturing, mechanical components for bicycles, electronic equipment, and non-ferrous metal products.

In the Chinese standard classification, the dimensions of oil tanks involve sliding bearings, oil tank cars, water supply and drainage equipment, machine tool components, machine tool accessories and accessories, fasteners, chain drives, belt drives and key connections, textile machinery and appliances, cold working processes, general fixtures, structural elements, general components, rubber products, cutting tools, machine tools, cooking tools, basic standards and general methods Maintenance and repair of marine main and auxiliary equipment and pipeline accessories, economic management, elemental semiconductor materials, insulators, wood processing materials, textile machinery and appliances, animal husbandry, poultry machinery and equipment, railway freight cars, fuel supply systems, metal casting and forging materials for aviation and aerospace, profiles, special steel, hydraulic components and accessories for aerospace, smelting equipment, rubber pipes, tapes, tapes, basic standards and general methods, manual tools Lubrication and lubrication devices, petroleum drilling and production equipment and instruments, magnifying glasses and microscopes, electrical insulation materials and their products, printing machinery, lifting, storage and transportation equipment, chemical machinery, steel plates, steel strips, automated logistics devices, wall materials, steel pipes, cast iron pipes, comprehensive vehicle general components, engines, mechanical accessories, components, rolling bearings, packaging materials and containers, welding and cutting equipment, forging machinery, tires Line components, environmental protection equipment, outdoor water supply and drainage engineering, pipe fittings, clamps, seals, bicycles, intake and exhaust and fuel supply systems, body and moving parts, lubrication, cooling systems and heating devices, lubrication systems, metering integration, rubber seals, light metals and their alloys, valves, hydraulic and pneumatic devices. 

Defense Logistics Agency, Standard for the Dimensions of Oil Tanks

DLA A-A-59595 C-2008 Bearing, Ball, Ring, Single Row, Radial, Non filled Groove, Cartridge Type without Grease Plug, Size Series 32

DLA A-A-59596 C VALID NOTICE 1-2011 Bearing, Ball, Annular, Single row, Radial, Non filled groove, Cartridge type without grease plug, Size series 33

International Organization for Standardization, standards for the size of oil tanks

ISO 12128:1995 Plain bearings - Lubrication holes, grooves, and oil cavities for general applications - Dimensions, types, nomenclature, and application of bearing bushings

ISO 12128:2001 Dimensions, types, markings, and applications of lubricating oil holes, grooves, and cavities in sliding bearings

ISO 12197:1996 Dimensions of half round keyway milling cutters

ISO 12197:2016 Half round keyway milling cutters - Dimensions

ISO 6986:1983 Dimensions of three sided edge (groove) milling cutters with indexable inserts

ISO 23748:2016 Aerospace series O-ring groove size

ISO 6986:2013 Three sided milling cutters with indexable inserts (slotted) size

ISO 2697:1999 Diesel Engine Fuel Injection Nozzle Couplings' S' Dimensions

ISO 2491:1974 Thin flat keys and their keyways (dimensions in mm)

ISO 5062:1978 Single unit fuel injection burners - Dimensions of oil pumps

ISO 20515:2007 Rolling bearings - Retained slotted radial bearings - Dimensions and tolerances

ISO 18388:2016 Technical Product Document (TPD) Overflow tank Type and size

ISO 10230:1990 Matching dimensions for bicycle keyway rear axle body and flywheel

ISO 23748:2016/Amd 1:2021 Aerospace series - Dimensions of O-ring grooves - Amendment 1

ISO 7612:1994 Installation dimensions of plunger type fuel injection pumps for diesel engines

ISO 12128:2010 Plain bearings - Lubrication hole grooves and grooves - Dimensional type names and their application on bearing bushings

RU-GOST R, standard for dimensions of oil tanks

GOST 18513-1973 End caps with oil grooves - Structure and dimensions

GOST 24120-1980 Keyway gauges for sizes 1 mm to 3 mm - Structure and dimensions

GOST 24967-1981 groove gauges with dimensions<3mm - Structure and dimensions

GOST 24968-1981 groove gauges with dimensions>3mm - Structure and dimensions

GOST 25570-1982 Oil filler caps for petroleum product tank trucks - Types, basic parameters and dimensions

GOST 14775-1981 Tooth shaper cutters - Retract grooves - Dimensions

GOST R 52967-2008 dovetail groove single angle milling cutters - Dimensions

GOST 3964-1969 Disk slot milling cutters - Basic dimensions

GOST 2528-1973 Hexagon slotted nuts for small size wrenches (improving accuracy) - Construction and dimensions

GOST 5935-1973 Hexagon slotted flat nuts for small size wrenches (high precision) - Construction and dimensions

GOST 13219.11-1981 Narrow end caps with oil grooves for rolling bearing seats with a diameter of 47-100mm. Structure and dimensions

GOST 13219.12-1981 Narrow end caps with oil grooves for rolling bearing seats with a diameter of 110-400mm. Structure and dimensions

GOST 8820-1969 Grinding wheel overtravel grooves - Shape and dimensions

GOST 16657-1980 Keyway die holders - Structure and dimensions

GOST 24669-1981 Straight grooves for screws and wooden screws - Dimensions

GOST 24110-1980 Keyway plug gauges with a diameter of 9mm to 18mm - Structure and dimensions

GOST 24111-1980 Keyway plug gauges with a diameter of 18mm to 56mm - Structure and dimensions

GOST 24112-1980 Keyway plug gauges with a diameter of 56mm to 125mm. Structure and dimensions

GOST 24121-1980 Keyway gauges with a diameter of 3mm to 50mm - Structure and dimensions

GOST 17933-1972 Spiral groove machine taps - Structure and dimensions

GOST 16652-1980 Die holder with rectangular groove - Structure and dimensions

GOST 18752-1980 Spring supports with inclined surfaces and grooves - Structure and dimensions

GOST 2893-1982 Rolling bearings - Outer ring grooves and retaining rings - Dimensions

GOST 18678-1973 Copper bullet grooves for lead sealing - Structure and dimensions

GOST 16984-1979 Keyway round nut wrenches - Structure and dimensions

GOST 29118-1991 Type and dimensions of dovetail groove single angle milling cutters

GOST R 57906-2017 diesel engines CR fuel injector installed on the bracket Overall and installation dimensions

GOST 28437-2015 Three sided milling cutters with indexable blades (slotted) size

GOST 17931-1972 Machine cocks with short grooves - Design and dimensional specifications

GOST 24119-1980 Arc keyway depth gauges - Structure and dimensions

GOST 13152-1967 Machine slot bolts - Design and dimensional specifications

GOST 18787-1980 Shoulder screws with screwdriver slot. Structure and dimensions

GOST 2833-1977 Screw plugs, spring coils and grooves - Structure and dimensional specifications

GOST 12492.4-1990 Agricultural machinery - One groove steel - Dimensional specifications

GOST 11641-1973 Grooved end caps for felt rings - Design and dimensional specifications

GOST 15059-1988 Diesel fuel injectors for automobiles and tractors - Specifications for overall dimensions and connection dimensions

GOST 9226-1992 Punching presses - Dimensions and positions of holes and grooves for fixing dies

GOST 2568-1971 Ripple angle of blades and grooves for cutting tools - Dimensional specifications

GOST 24113-1980 Keyway prism gauges for shafts with diameters ranging from 8mm to 22mm - Structure and dimensions

GOST 24114-1980 Keyway prism gauges for shafts with a diameter of 22mm to 200mm - Structure and dimensions

GOST 24115-1980 Keyway depth gauges for holes with a diameter of 3mm to 10mm - Structure and dimensions

GOST 24116-1980 Keyway depth gauges for holes with a diameter of 10mm to 90mm - Structure and dimensions

GOST 24117-1980 Keyway depth gauges for holes with a diameter of 90mm to 200mm - Structure and dimensions

GOST 24118-1980 Keyway depth gauges for shafts with a diameter of 6mm to 200mm - Structure and dimensions

GOST R 52966-2008 Multi slot Fried Dough Twists drills for small holes in front of self tapping screws - Reference dimensions

GOST 5384-1989 Crank stamping machines - Parameters and dimensions - Dimensions and arrangement of slots and openings for fixed tools - Accuracy standards

GOST 1574-1991 Metal cutting machines - Mechanical T-grooves - Dimensional specifications

GOST 16170-1991 Type 6A2 grooved flat diamond grinding wheels - Basic dimensions

GOST 16985-1979 Adjustable head wrenches for keyway round nuts - Structure and dimensions

GOST 18874-1973 High speed steel grooving and cutting knives - Structure and dimensions

GOST 20867-1981 Circular fixed mounting brackets with slots and threaded holes - Structure and dimensions

GOST 17930-1972 Short slot machine taps for light alloy processing - Structure and dimensions

GOST 13044-1985 Shell shaped multi slot drilling and reaming tools - Structure and dimensional specifications

GOST 19392-1974 channel steel for fastening core box drying boards - Structure and dimensions

GOST 4029-1963 Nails for oil paper - Structure and dimensions

German Institute for Standardization, standards for the size of oil tanks

DIN 75012:1986 Road tank trucks - Dipstick assemblies - Connecting dimensions

DIN 75012:2015 Road tank trucks - Dipstick assemblies - Connecting dimensions

DIN 19563:1985 Washing sinks - Dimensions

DIN 69638:1984 Machine tools - Slot shape and pitch - Dimensions

DIN 70852:1989 Slotted nuts - Dimensions

DIN 650:1989 Machine tools - T-grooves - Dimensions

DIN 509:1998 Undercut - Types and dimensions

DIN 1890-1:1981 straight tooth slotting cutters - Dimensions

DIN 75013:2015 tank trucks - Ground plates, dimensions

DIN 75013:1979 tank trucks - Ground plates, dimensions

DIN EN 695:2005-11 Kitchen sink connection dimensions

DIN 55200:1989 Machine tools - T-slot pitch - Dimensions

DIN EN 695:2005 Kitchen sink - Connection dimensions

DIN 851-1:1991 straight shank T-slot milling cutters - Dimensions

DIN 1891-1:1981 Cross tooth adjustable slot milling cutters - Dimensions

DIN 326-1:1981 Morse taper shank slot milling cutters - Dimensions

DIN 68126-1:1983 Cross section templates with grooves and wide roots - Dimensions

DIN 11840:1991 Agricultural machinery - Drinking water tanks - Installation dimensions

DIN 26017:1987 Tank trucks and container tanks - Threaded shut-off devices - Installation and connection dimensions - Accessories

DIN 26016:1987 Tank trucks and container tanks - Flange connected shut-off devices - Installation and connection dimensions - Accessories

DIN 8031:1986 Side and end milling (slotting) cutters for indexable inserts - Dimensions

DIN 1880-1:1993 cylindrical end mills with tenon and parallel keyway - Dimensions

DIN 850-1:1989 Half round keyway milling cutters - Part 1: Dimensions

DIN 509:2006 Technical drawings - Retract grooves - Types and dimensions

DIN 851-2:1991 Morse taper shank T-slot milling cutters - Dimensions

DIN 5200:1987 Double compensating screwdrivers for slotted head screws - Dimensions

DIN 327-1:1989 straight shank keyway drills - Part 1: Dimensions

DIN 3410:1974 Lubricating oil discharge nozzles - Overall dimensions and assembly dimensions

DIN 8731:1968 Slotted drum for gravure printing rotary machines - Main dimensions

DIN 19556:2004-03 Main dimensions of tanks with shut-off devices in wastewater treatment plants

DIN 3401:1966 Drip oilers and oil cups - Main dimensions

DIN EN 10279:2000-03 Hot rolled channel steel - Tolerances on shape, dimensions, and quality

DIN 28147:1985 Enamel hot baths for mixing vessels - Installation dimensions

DIN EN 3427:2007-01 Aerospace series - Groove dimensions for radial mounting retaining rings

DIN 75013:2015-12 Dimensions of grounding plates for oil tank trucks

DIN 66075-5:1975 Catering equipment - Part 5: Dimensions of washing tanks

DIN 327:2023-04 Parallel shank slot drills - Dimensions and technical delivery conditions

DIN 1026-1:2000 hot-rolled channel steel - Part 1: Channel steel with sloping flanges - Dimensions, mass and cross-sectional characteristics

DIN 75014:1991 Arched top cover for drum tank trucks - Dimensions

DIN EN 3427:2007 Aerospace series - Groove dimensions for radial mounting fixed rings

DIN EN 10092-2:2004-01 Hot rolled spring steel flats - Part 2: Spring plates with ribs and grooves, dimensions and tolerances on shape and dimensions

DIN 75012:2015-10 Fit dimensions of dipstick components for highway tank trucks

DIN 5902:1995 Dimensions of fishplates for slotted flat bottom rails - Steel types

DIN 19556:2004 Wastewater treatment equipment - Gate type flow channels - Main dimensions

DIN 65521-1:1984 Aerospace - Wing shaped cross grooves - Part 1: Dimensions

DIN EN ISO 18388:2010-01 Product Technical Document (TPD) Pressure Reducing Tank Types and Dimensions

DIN 851:2019-01 Parallel shank T-slot milling cutters - Dimensions and technical specifications

DIN 3127-1: 1995 Screwdrivers for slotted head screws - Part 1: Dimensions

DIN EN 10092-2:2004 Hot rolled spring steel flat bars - Part 2: Ribbed and grooved springs - Dimensions and tolerances on shape and dimensions

DIN EN 3425:2007-02 Aerospace series - Dimensions of grooves for axial mounted inner retaining rings

DIN EN 3426:2007-02 Aerospace series - Dimensions of grooves for axial mounted outer retaining rings

DIN 71455:1980 Filter cartridges for bypass lubricating oil filters - Dimensions

DIN 1026-1:2009 Hot rolled steel grooves - Part 1: Dimensions, weight, and cross-sectional properties of conical flange steel grooves

DIN 1026-1:2009-09 Hot rolled channel steel - Part 1: Dimensions, mass, and cross-sectional characteristics of tapered flange channel steel

DIN 5906:1995 Short circuit clamps for flat bottomed rail without grooves - Dimensions and steel types

DIN 7516:2016 Cross recessed thread cutting screws - Dimensions, requirements and testing

DIN 7516:1995 Cross recessed thread cutting screws - Dimensions, requirements and testing

DIN EN 10365:2017-05 Dimensions and masses of hot-rolled channel steel, I-shaped steel, and H-shaped steel

IN-BIS, standard for dimensions of oil tanks

Dimensions of cross grooves in IS 7478-1985

IS 3428-1980 Dimensions of pressure relief grooves

Dimensions of lubrication holes, grooves, and apertures in IS 7745-1975

IS 808-1989 Dimensions of hot-rolled steel beams, columns, channels, and angles

Dimensions of IS 7744-1975 oil drip lubricator

IS 8114-1984 Guide for machining dimensions of propeller hubs with keyways

Dimensions of tenons and cross grooves with conical holes 1:30 in IS 5568 1978

IS 7831-1975 Dimensions of Aircraft Lubrication Nozzles

Dimensions of optional grooves on Morse taper shanks for tools (IS 10293-1982)

Dimensions of split pin holes, wiring holes, and bolt head grooves in IS 9549-1980

IS 808 Pt.3-1979 Dimensions of hot-rolled steel beams, channels, and angles - Part III: Channel, MC, and MCP series

IS 7828-1975 Dimensions of gravity refueling ports for aircraft

IS 8723-1978 Dimensions of vibrating conveyors and feeders with rectangular or trapezoidal grooves

Recommended dimensions and capacity of oil press according to IS 10341-1982 (single chamber)

IS 10478-1983 Taper dimensions for the shaft end and hub of fuel injection pumps

PL-PKN, standard for dimensions of oil tanks

PN H93403-1986 Dimensions of rolled steel grooves

PN E92806-1953 Cable heads and cable boxes - Sealing grooves and pin grooves - Dimensions

PN BN 2222-01-1964 Sink equipment - Dimensions of conical bottom

PN H93206-1955 Hot rolled spring steel - Grooved flat steel bars - Dimensions

PN BN 2221-18-1965 Vertical unpressurized water storage tanks for storing liquids - Main dimensions

PN M57048-1961 Metal cutting tools - Slotting profile dimensions for combination tools

Overview and main dimensions of PN S91240-31-1986 pneumatic wheel wide groove rims

PN M68008-1971 Hydraulic molding machines for plastics - Dimensions and patterns of T-grooves for mold clamping

PN S91240-20-1990 Pneumatic wheels - Groove rims with flange B - Outline and main dimensions

CU-NC, standard for dimensions of oil tanks

Dimensions of groove wheels for NC 07-04-1969 V-belts

RO-ASRO, standard for the size of oil tanks

STAS 1387-1970 T-slot nuts - Dimensions

STAS 5257-1980 keyway milling cutters - Dimensions

STAS 1682-1980 T-slot cutting tools - Dimensions

STAS 7803-1980 Slotted conical pins - Dimensions

STAS 1159/1-1986 Dimensions of Metal Slotting Saws

STAS 2759-1979 Sanitary fixtures - Sink dimensions

STAS 1007-1981 Tapered keys and keyway dimensions

STAS 431-1981 Fine taper keys and keyways - Dimensions

STAS 1004-1981 Parallel Keys and Keyway Dimensions

STAS 1010-1980 Tangential keys and keyway dimensions

SR 1385-1995 Machine tools - Dimensions of T-slots

STAS 4072-1970 Slotted hexagonal nuts - Dimensions

STAS 7464-1971 Slotted cylindrical dowels - Dimensions

STAS 1681-1985 Slotted milling cutters with taper shanks - Dimensions

STAS 7545-1983 Cross shaped screw grooves - Dimensions

STAS 1680-1985 Slotting milling cutters with cylindrical shanks - Dimensions

STAS 1683-1980 End mills with taper shank grooves - Dimensions

STAS 7346-1983 Triangular profiles - Dimensions of multi groove shafts and sliding groove shells

STAS 7439-1987 Parallel keyway and half round keyway gauges - Dimensions

STAS 4882-1973 Railway Tank Car Valves - Fitting Dimensions

STAS 1451-1980 Wood screw shanks - Slotted head screws - Dimensions

STAS 5173-1969 Flat pins with hexagonal grooves - Dimensions

STAS 9501-1981 Thin Parallel Keys and Keyway Dimensions

STAS 12933-1991 High parallel keys and keyway dimensions

STAS 9344/4-1986 self tapping screws - Dimensions for slotted pan head screws

STAS 3041/7-1974 Single row non filled groove ball bearings with washers. 02 series dimensions. Basic dimensions

Slots for woodworking tools with milling cutters - Shape and dimensions (STAS 10806/2-1980)

Support groove plates for STAS 8745-1970 machine retention devices - Dimensions

STAS 9234-1973 Concave conical keying, key and keyway cross-sections, dimensions

Dimensions of slotted flat end chamfered end screws (STAS 4770-1979)

STAS 6246-1985 Rolling bearings with stop rings - Dimensions of rings and grooves

STAS 5652/3-1978 installation tools - Dimensions of end wrenches for slotted retaining rings

STAS 5332-1980 precision nuts - Slotted circular nuts - Dimensions

STAS 7519-1971 Refined screws, slotted pan head screws. Dimensions

STAS 11956-1984 Woodworking tools - Straight groove drill bits - Main dimensions

STAS 363/4-1976 High speed steel planer, slot tool dimensions

STAS 7139/7-1979 Bus groove rims - Dimensions and shapes

STAS 9344/2-1986 self tapping screws - Slotted countersunk head screws - Dimensions

STAS 773-1970 Plain bearings with oil rings - Oil rings - Dimensions

STAS 2242-1980 Dimensions of U-shaped and I-shaped Cross Section Channel Iron Clamps

STAS 10237-1980 Long slot machine reamers, Morse taper shank dimensions

STAS 12579-1987 Internal slotted head with eccentric design main dimensions

STAS 1453-1980-1 Wood screws - Dimensions of slotted raised countersunk head screws

STAS 1452-1980 Wood screws - Dimensions of slotted raised countersunk head screws

STAS 1453-1980 Wood screws - Dimensions of slotted raised countersunk head screws

STAS 12170-1984 Types and dimensions of textile machinery beads and corresponding grooves

STAS 5848/2-1988 Eccentric safety rings for general and heavy-duty shafts and grooves - Dimensions

STAS 9884-1974 Pneumatic handling equipment - Air chutes - Basic dimensions

STAS 9660-1987 Ventilation and air conditioning plants - Cold air ducts - Shape and dimensions

STAS 12591-1987 projection welding machine drum T-slots - Dimensions and positions

STAS 7520-1971 Refined screws - Slotted half countersunk head wood screws - Dimensions

STAS 3167-1986 Screw grade B. Slotted half countersunk head screws. Dimensions

STAS 7546/3-1977 Hardware tools - Cross recessed screw drivers - Dimensions

STAS 9344/3-1986 self tapping screws - Slotted raised countersunk head screws - Dimensions

STAS 9344/6-1980 self tapping screws - Cross recessed countersunk head screws - Dimensions

STAS 9647/3-1990 Quick connect terminals - Dimensions of flat groove connectors

STAS 9399-1984 tool uses a 1:20 taper pin groove and profile as dimensions

STAS 6162-1977 Technical drawings - Representation and dimensions of splined shafts and slide housings

Eccentric safety rings for universal and heavy-duty slotted drill bits, STAS 5848/3-1988- Dimensions

STAS 7639-1980 Mechanical equipment - Dimensions of oil gauges

STAS 7518-1971 Refined screws - Dimensions of slotted half countersunk head screws

STAS 5144-1980 Refined bolts - Cylindrical head hexagonal groove bolts - Dimensions

STAS 8415-1969 production equipment - L-shaped grooved flange sizes/dimensions for nuts

STAS 1742-1980 Cast iron and steel flanges - Gaskets NP10. NP 40 dimensions for sealing surfaces with groove and raised groove joints

STAS 1739-1980 Cast iron and steel flanges - Dimensions NP10... NP 40 with groove and convex groove joint sealing surfaces

STAS 2571-1986 screws - Grade B slotted countersunk head taper hole screws - Dimensions

STAS 9344/7-1980 self tapping screws - Cross recessed raised countersunk head screws - Dimensions

Dimensions of fuel injection pumps for STAS 9471-1985 compression ignition engines - Overall and matching dimensions

STAS 10118-1981 Aircraft pressure refueling - Connection dimensions

American Aviation Industry Association, Standard for the Dimensions of Oil Tanks

AIA NA 0139-1981 Keyways and Keyway Dimensions Metric

AIA NASM9006-1998 FSC 5305 groove cross, low torque drive, dimensions, and gauge dimensions

AIA NASM33750-1998 FSC 53GP groove dovetail groove, groove and conical dovetail groove, groove size, gauge and screwdriver

AIA NAS 4000-1994 (discontinued) grooves, three grooves, groove dimensions, and gauges (revision 5)

AIA NASM35756-1998 Keys, Half Round Keys, Steel, Alloy, with Keyway and Keyway Dimensions FSC 5315

AIA NAS 7100-2001 FSC 53GP groove, ribbed cross, groove dimensions and gauges; Revision 8

AIA NAS 1800-1990 Dimensions for grooves, six leaf drive internal grooves, and gauges, Revision 2 R (2001)

AIA NA 0025-1984 Torque Setting Dimensions for Grooves, Gauges, and Drivers, Metric (Revision 2)

AIA/NAS - Aerospace Industries Association of America Inc., Standards for the Dimensions of Oil Tanks

NA0139-1981 Keyway and Keyway Dimensions Metric

NASM35756-1998 Key Wooddruff Steel Alloy with keyway and keyway dimensions

NA0139-2012 Keyway and Keyway Dimensions Metric (Revision 1)

NASM33750-1998 Notch Dovetail and Conical Dovetail Groove Size Gauges and Drivers

NAS1078-1978 Groove and Groove Gauge Dimensions Torq Set (Revision 7)

NAS7100-2013 Dimensions of Ribbed Cross Grooves and Gauges (Revision 9)

AT-ON, standard for the size of oil tanks

ONORM S 3011-1995 Commercial catering equipment sinks - Catering equipment dimensions - Sink dimensions

ONORM M 6504-1985 uses V-belts and grooved pulleys for belt transmission. Dimensions, materials, and conformity identification of grooved pulleys

ONORM L 5216-1989 Trailer coupling ring with slot and reinforced shaft 40 size, material

ONORM M 4930-1988 Slotted head screw drivers - Dimensions, technical supply conditions

CZ-CSN, standard for the size of oil tanks

CSN 02 1041-1980 Slots for screws - Dimensions

CSN 20 0426-1961 Slotting machinery - Basic dimensions

CSN 13 7170-1987 Wall mounted mixing valves for sinks - Dimensions

CSN 13 7174-1986 Wall mounted mixing valves for water tanks - Dimensions

CSN 22 2748-1979 Multi groove shaft hobs - Basic dimensions

CSN 42 6970-1975 Steel thin-walled joints with groove track width. Dimensions

CSN 13 7172-1986 Ceramic wall mixing valves for water tanks - Dimensions

CSN 42 6967-1975 Steel thin-walled parts, slotted - Dimensions

CSN 22 4520-1978 Basic dimensions of flat grinding wheels with single grooves

CSN 13 2109-1986 Dimensions of Centrifugally Cast Catheters, Alves and Ends

CSN 22 4523-1978 Basic dimensions of flat grinding wheels with two grooves

CSN 22 1432-1986 spiral groove drilling machines - Basic dimensions

CSN 22 1447-1986 parallel groove drilling machines - Basic dimensions

Piston pins for CSN 30 2130-1965 gasoline engines - Dimensions

CSN 13 2110-1986 Dimensions of Alves and Ends for Catheters and Catheter Accessories

CSN 22 4522-1986 Grinding wheels with single funnel shaped grooves - Basic dimensions

CSN 22 4526-1978 Flat grinding wheels with two grooves on both sides - Basic dimensions

CSN 05 2521-1983 Dimensions and positioning of chuck slots for projection welding machines

CSN 91 0724-1960 Kitchen display cabinet with sink - Basic dimensions and design

CSN 91 0723-1960 Kitchen display cabinet with sink - Basic dimensions and design

CSN 30 2131-1965 diesel engine piston pins - Dimensions

CSN 09 7365-1974 Fuel injection pump couplings - Dimensions

CSN 34 8114-1984 Insulator string unit slot connections - Basic dimensions

CSN 25 7037-1984 Operating deformation pressure gauges in angle boxes - Dimensions of panel slots

CSN 22 3920-1979 Hexagonal lathe cutting tools - High speed steel - Basic dimensions

CSN 23 0807-1981 screwdriver - Wooden screws with straight spiral grooves and screw types and dimensions

CSN 30 0815-1983 Wired plugs and funnels for fuel tanks of motor vehicles - Installation dimensions

CSN 22 0429-1981 Tapered alveolar teeth with holes fixed by wedges with taper shanks - Basic dimensions

SE-SIS, standard for the size of oil tanks

SIS SS 2773-1985 Welds - Groove dimensions

SIS SS 2773-1980 Welds - Groove dimensions

SIS SS 83 10 14-1989 Sinks, rainwater pipes and fittings - Determination of dimensions

SIS SMS 294-1966 Interchangeable dimensions for milling cutters and tool holders - Keys and keyways

SIS SS 424 12 11-1986 Overhead Line Materials - Slot Connection Dimensions

SIS 71 20 06 Margarine and cream - Dimensions

SIS 83 10 10-1972 Storm water tanks and drainage pipes - Basic dimensions

SIS SS-ISO 6986:1985 Indexable three sided (slot) milling cutters - Dimensions

SIS SS 82 72 12-1979 Air conditioning - Electric air conditioning water heaters connected to circular cross-section air conditioning troughs - Dimensions

IT-UNI, standard for dimensions of oil tanks

UNI 2620-1944 curved tiles (slotted tiles) - Dimensions

UNI 6046-1967 Rolling bearings - Dimensions of fixed concave elastic rings and related groove dimensions except for the size series 00.82 and 83)

Industry standard - Mechanical, standard for the size of oil tanks

JB/T 3411.96-1999 Slotting tool holders - Dimensions

JB/T 9162.2-1999 V-groove watch holders - Dimensions

JB/T 3411.27-1999 Slotting tool bars - Dimensions

JB/T 3411.22-1999 Keyway Broach Collets - Dimensions

JB/T 3411.24-1999 Gaskets for keyway broaching - Dimensions

JB/T 7298-2006 Oil outlet valve components - Main dimensions and installation dimensions

JB/T 7298-1994 Main dimensions and installation dimensions of oil outlet valve components

JB/T 7298-2020 Main dimensions and installation dimensions of oil outlet valve components

JB/T 2452-1999 Tank trucks - Types, basic parameters and dimensions

JB/T 2452-2010 Material Tank Model, Basic Parameters and Dimensions

JB/ZQ 4609-2006 Dimensions of Round Rubber, Round Rubber Pipes, and Grooves

JB/T 8230.12-1999 Microscopes - Connecting dimensions for tube sliders and tube grooves

JB/T 3843-1999 Hydraulic presses - Distribution patterns and dimensions of grooves and holes for fastening molds

JB/T 3843-2014 Distribution and Dimensions of Slots and Holes for Hydraulic Press Tightening Dies

JB/ZQ 4183-2006 Square double wedge keys - Key and keyway types and dimensions

JB/T 9731.2-1999 Diesel engine fuel injection pump camshaft - Shaft end dimensions

JB/T 6495-1992 Valve Structural Elements - Gate (or Disc) T-groove Dimensions

JB/T 6498-1992 Valve Structural Elements - Dimensions of Valve Disc and Valve Stem Connection Grooves

JB/T 6376-1992 Rubber sealing rings for pneumatic valves - Groove dimensions and tolerances

American Aerospace Industry Association/National Aerospace Industry Standards, Standards for the Dimensions of Oil Tanks

AIA/NAS NA 0139-1981 Metric slot size keys and keyways

AIA/NAS NAS 4000-1994 (Rev. 5) groove and gauge size three slot groove

AIA/NAS NA0139-2012 Keyway and Keyway Dimensions Metric (Revision 1)

AIA/NAS NAS7100-2013 Dimensions of grooves, ribbed cross shapes, grooves, and gauges (Revision 9)

AIA/NAS NASM33781-2011 Dimensions of grooves, offset crosses, grooves, gauges, and drivers (Rev 3)

AIA/NAS NASM33750-2011 grooves, dovetail grooves, and tapered dovetail grooves, groove dimensions, gauges, and drivers (Rev 1)

AIA/NAS NASM35756-2011 Keys, Sawdust, Steel, Alloy, with Keyways and Keyway Dimensions (Revision 1)

AIA/NAS NASM14191-2016 Groove, Offset Cross, Ribbed Groove, Gauge, and Driver Dimensions (Revision 4)

AIA/NAS NASM33750-1998 FSC 53GP Sag Size Narrow Slot Conical Driver

Dimensions and gauges for AIA/NAS NASM9006-2010 small torque drive cross recesses; Amendment 1

AIA/NAS NAS 7100-2001 (Rev. 8) FSC 53 General purpose grooves and gauge dimensions Cross ribbed grooves

FI-SFS, standard for the size of oil tanks

SFS 3263-1975 ISO tolerances - Different dimensions of grooves

SFS 3262-1975 ISO tolerances - Tolerancing dimensions for grooves and shafts

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standards for the Dimensions of Oil Tanks

GB/T 1563-2003 Cross Section Dimensions of Wedge Keyways

GB/T 1095-2003 Cross section dimensions of flat keyways

GB/T 1098-2003 Sectional Dimensions of Half Round Key Grooves

GB/T 1566-2003 Profile dimensions of thin flat keyways

GB/T 35087-2018 Dimensions, types, markings and applications of lubricating oil holes, oil grooves, and oil pockets in sliding bearing sleeves

GB/T 6124-2007 T-slot milling cutters - Types and dimensions

GB/T 25317-2010 Slot Connection Dimensions for Insulator String Units

GB/T 14329.1-1993 Flat body keyway broaches - Types and dimensions

GB/T 6124.1-1996 T-slot milling cutters - Part 1; Types and dimensions of straight shank T-slot milling cutters

GB/T 22060-2008 Microscopes - Connecting dimensions of cylinder sliders and cylinder grooves

GB/T 1112.1-1997 Keyway milling cutters - Part 1; Straight shank keyway milling cutters - Types and dimensions

GB/T 14329.2-1993 Widened flat blade keyway broaches - Types and dimensions

GB/T 14329.3-1993 Broaches with chamfered keyway - Types and dimensions

GB/T 6124.2-1996 T-slot milling cutters - Part 2; Types and dimensions of T-slot milling cutters with Morse taper shanks

GB/T 1119.1-2002 Sharp tooth slot milling cutters - Part 1; Type and size

GB/T 1112.2-1997 Keyway milling cutters - Part 2; Mohs taper shank keyway milling cutters - Types and dimensions

GB/T 707-1988 Hot rolled channel steel - Dimensions, shape, weight and permissible deviations

GB 707-1988 Hot rolled channel steel - Dimensions, shape, weight and permissible deviations

GB/T 3452.3-2005 Dimensions of grooves for O-ring rubber seals for hydraulic and pneumatic applications

GB/T 27556-2011 Rolling bearings - Positioning grooves for radial bearings - Dimensions and tolerances

The General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the National Standardization Administration of China, regarding the size standards of oil tanks

GB/T 1563-2017 Cross Section Dimensions of Wedge Keyways

Japan Industrial Standards Survey, Standards for the Size of Oil Tanks

JIS L 5121:1987 Groove shape and size of groove rollers for worsted machines

JIS L 5138:1987 Grooves and dimensions of groove rollers for woolen spinning machines

JIS D 3903:1966 Dimensions of Plug Connections for Motorcycle Fuel Tanks

JIS B 1510:2010 Rolling bearings - Retained slotted radial bearings - Dimensions and tolerances

JIS D 2501:1995 Automotive Components - Fuel Tank Covers and Fillers - Dimensions

Industry standard - aviation, standards for the size of oil tanks

HB 7787-2005 Dimensions of Gear Shaper Retract Groove

HB 5965-2002 Dimensions and technical requirements for fir tree tenons and mortises

HB 5964-1986 Dovetail tenon and tenon groove dimensions and technical requirements

HB 5964-2002 Dimensions and technical requirements for dovetail tenons and tenons

HB 5513-1980 General type steel wire thread inserts with break grooves - Types and dimensions

HB 5965-1986 Dimensions and technical requirements for fir tree tenons and mortises

HB 5514-1980 General type non breaking groove steel wire thread inserts - Types and dimensions

Korean Bureau of Science and Technology Standards, standards for the size of oil tanks

Dimensional Drawing 1 of KS R 3045-1-2009 Diesel Engine Fuel Injection Pump

KS B ISO 12128:2002 Plain bearings - Lubricating oil holes, oil grooves, and oil pockets - Dimensions, types, markings, and their applications

KS R 2051-1986 (2016) Shape and dimensions of fuel tank filling guns for automobiles

KS R 3013-1972 (2011) Connection dimensions for automotive fuel tanks

KS B 7925-2013 Rotary tiller nozzle dimensions

KS B 7926-2013 Rotary Tiller Oil Cap Dimensions

KS R ISO 2697-2007 (2022) Diesel engines - Fuel nozzles - Size 'S'

KS C IEC 60471:2003 Dimensions of Slot and Flat Pin Connections for Insulator String Units

KS B 6871-1999 (2009) Earthmoving machinery - Dimensions and dimensions of fuel tank covers

KS B ISO 12128-2017 (2022) Plain bearings - Lubrication hole grooves and grooves - Dimensions, type names and their application on bearing shells

KS R 3031-1980 Automotive Diesel Engine Fuel Filter Dimensions

KS R 3031-1980 (2010) Automotive Diesel Engine Fuel Filter Dimensions

KS R 3031-1972 Automotive Diesel Engine Fuel Filter Dimensions

KS R 2051-1986 (2021) Shape and dimensions of fuel tank filling guns for motor vehicles

KS B 6871-2013 Earthmoving Machinery - Fuel Injection Port Dimensions

KS R 3011-1990 (2010) Automotive Carburetor Flange Dimensions

KS R 3011-1971 Automotive Carburetor Flange Dimensions

KS R ISO 7879:2005 diesel engines - Plunger injection pumps - Installation dimensions

KS R ISO 7879:2015 Installation dimensions of plunger injection pumps for diesel engines

Main dimensions of rotary cultivators with KS B 7925-2007 (2012) nozzles

KS B ISO 12128:2017 Plain bearings - Lubrication hole grooves and grooves - Size type names and their application on bearing bushings

KS B ISO 20515:2008 Rolling bearings - Positioning grooves for radial bearings - Dimensions and tolerances

KS B ISO 2491-2003 (2013) Fine parallel keys and their corresponding keyways (dimensions in millimeters)

KS B ISO 20515-2016 (2021) Rolling bearings - Fixed groove dimensions and tolerances for radial bearings

KS B ISO 20515:2016 Rolling bearings - Dimensions and tolerances for locating grooves in radial bearings

KS R 2051-1986 Automotive refueling gun appearance and dimensions

British Standards Institution, standard for the dimensions of oil tanks

BS ISO 12197:1997 Half round keyway milling cutters - Dimensions

BS ISO 12128:2002 Plain bearings - Lubricating oil holes, oil grooves, and oil pockets - Dimensions, types, markings, and their application to shaft sleeves

BS EN 10279:2000 Hot rolled steel grooves - Tolerances on mass, dimensions, shape

BS EN 3748:2001 Aerospace series - O-ring grooves - Dimensions

BS ISO 6986:2013 Three sided milling cutters with indexable inserts (slotted) size

BS EN 10365:2017 I and H-shaped hot-rolled steel grooves Size and mass

BS EN 10092-2:2003 Hot rolled spring flat steel bars for general purposes - Ribbed and grooved springs - Dimensions, shape and dimensional tolerances

BS EN 10092-2:2003 (2008) Hot rolled spring flat steel bars for general purposes - Ribbed and grooved springs - Dimensions and tolerances on shape and dimensions

BS EN 3427:2006 Aerospace series - Groove dimensions for radial mounting fixed rings

BS 7805-1: 1995 Ring forged slotted rivets - Specification for diameters up to and including 10mm

BS ISO 1641-2:2011 Flat milling cutters and slot drills - Dimensions and identification of Mohs taper shank milling cutters

BS ISO 18388:2016 Technical Product Document (TPD) Overflow tank Type and size

BS EN ISO 18388:2019 Product Technical Documentation (TPD) Relief Groove Types and Dimensions

HU-MSZT, standard for the size of oil tanks

MSZ 2068-1976 Cross shaped grooves - Surface dimensions

MSZ 14482-1968 Circular groove tooth shaft connections - Dimensions and tolerances

AENOR, standard for the size of oil tanks

UNE-EN 695:2006 Kitchen sink connection dimensions

UNE 25221:1974 General dimensions of pins with grooves

UNE-EN 10279:2001 Tolerances on the shape, dimensions, and mass of hot-rolled steel grooves

UNE 126108:2005 Dimensional characteristics of positioning notches for glass containers

UNE-EN 10092-2:2005 Hot rolled spring steel flat bars - Part 2: Dimensions, shape and dimensional tolerances for spring plates with ribs and grooves

UNE-EN 2049:2002 Aerospace series - Aluminum alloy extruded channel profiles - Dimensions

Danish Standardization Association, standards for the size of oil tanks

DS/EN 695:2005 Kitchen sink connection dimensions

DS/EN 3748:2002 Aerospace series - O-ring groove dimensions

DS/EN 3427:2006 Aerospace series - Groove dimensions for radial mounting retaining rings

DS/EN 10092-2:2004 Hot rolled spring steel flat bars - Part 2: Dimensions, shape and dimensional tolerances for spring plates with ribs and grooves

DS/EN 10279:2002 Permissible deviations in shape, size, and quality of hot-rolled channel steel

DS 6038:1983 Agriculture - Slurry tank valves - Installation dimensions and acceptance standards

DS/EN 2049:2001 Aerospace series - Aluminum alloy extruded channel profiles - Dimensions

Lithuanian Bureau of Standards, standards for the size of oil tanks

LST EN 695-2006 Kitchen Sink Connection Dimensions

LST EN 3748-2002 Aerospace series - O-ring groove dimensions

LST EN 3427-2006 Aerospace series - Groove dimensions for radial mounting retaining rings

LST EN 10092-2-2004 Hot rolled spring steel flat bars - Part 2: Dimensions, shape and dimensional tolerances for spring plates with ribs and grooves

LST EN 3425-2006 Aerospace series - Groove dimensions for axial mounted inner retaining rings

LST EN 10279-2001 Hot rolled channel steel - Permissible deviations in shape, size, and quality

LST EN 2049-2002 Aerospace series - Aluminum alloy extruded channel profiles - Dimensions

French Institute for Standardization, standard for the size of oil tanks

NF EN 695:2005 Kitchen sink connection dimensions

NF ISO 1641-3:2011 End mills and slot cutters of different sizes - Part 3: Dimensions and designations for 7/24 taper shank end mills

NF ISO 1641-2:2011 Cylindrical and slot milling cutters of different sizes - Part 2: Dimensions and designations for Morse taper shank milling cutters

NF E73-510:1980 Wood machining tools - Slotting tools - Dimensions

NF A45-007:1983 Metallurgical products - Hot rolled small channel steel - Dimensions and tolerances

NF A45-042:1983 Steel - Hot rolled grooved spring steel - Dimensions and tolerances

NF A45-212 * NF EN 10365:2017 Hot rolled channel steel, I-type and H-type dimensions and masses

NF H35-098:1991 Bottlemaking Industry - Glass Bottles - Flat Glass Bottle Mouths with 29mm Slots - Dimensions

NF A82-107:1987 Resistance Welding - Cylindrical Welding Nozzles with Ring Groove - Dimensions and Tolerances

NF L46-021:2002 Aerospace series - O-ring grooves - Dimensions

NF E22-182:1991 Mechanical transmission - Tangential keys and keyways - Dimensions and tolerances

NF E04-567 * NF EN ISO 18388:2019 Product Technical Document (TPD) Pressure Reducing Tank Types and Dimensions

NF A45-042-2 * NF EN 10092-2:2004 Hot rolled spring steel flat bars - Part 2: Dimensions, shape and dimensional tolerances for ribbed and grooved springs

NF L23-254 * NF EN 3427:2006 Aerospace series - Keyway dimensions for radial mounting fixed washers

NF E22-355:2012 Rolling bearings - Radial bearings, fixed grooves - Dimensions and tolerances

NF E21-301:1985 Machine tool workbenches - T-grooves and accessories - Dimensions and tolerances

NF A50-709:1981 Aluminum and aluminum alloys - Extruded profiles: Groove shapes, tolerances and dimensions

Ford Motor Standard (USA), standard for the size of oil tanks

FORD WB900 APPENDIX D-1996 Dimensional Requirements for Internal Lobed Grooves

VN-TCVN, standard for the size of oil tanks

TCVN 3964-1984 T-slot milling cutters - Basic dimensions

TCVN 3959-1984 HSS end keyway milling cutters - Basic dimensions

TCVN 1285-1985 Grinding wheel exit grooves - Shape and dimensions

TCVN 58-1977 Slotted screws with tapered end - Construction and dimensions

TCVN 57-1977 Slotted screws with cylindrical end - Structure and dimensions

TCVN 4242-1986 Stop spring rings for holes and grooves - Dimensions

TCVN 1903-1976 Hexagon slotted nuts (standard accuracy) - Dimensions

TCVN 56-1977 Slotted flat end set screws - Construction and dimensions

TCVN 1911-1976 Hexagon lock slotted nuts (high precision) - Dimensions

TCVN 1912-1976 Hexagon lock slotted nuts (high precision) - Dimensions

TCVN 3961-1984 End keyway milling cutters with carbide inserts - Basic dimensions

TCVN 1914-1976 hexagonal lock slotted nuts with opposite sides (high precision) - Dimensions

TCVN 2045-1977 diesel engines - Overall dimensions

TCVN 3607-1981 Rolling bearings - Outer ring grooves and spring locking rings - Dimensions

TCVN 1904-1976 Hexagon lock slotted nuts (standard accuracy) - Dimensions

TCVN 1913-1976 Hexagon slotted nuts with reduced width across flats (high precision) - Dimensions

TCVN 4239-1986 Plain concentric rings for stop springs for shafts and grooves - Dimensions

TCVN 4240-1986 Retaining spring flat concentric rings for holes and grooves - Dimensions

TCVN 4241-1986 Stop spring flat eccentric rings for shafts and grooves - Dimensions

Industry standards - Transportation, standards for the size of oil tanks

JT/T 541-2004 Classification and Repair Dimensions of Piston Rings and Grooves for Small Marine Diesel Engines

American Society of Motor Vehicle Engineers, Standard for the Dimensions of Oil Tanks

SAE AS8538-2019 groove, internal, TORX ®  PARALOBE ®  Dimensions of drives, grooves, and gauges

SAE RS-734-1-1979 Groove Dimensions for RS734 Washers (Metal Seals)

SAE RS-741-1981 Shaft and groove dimensions for RS741 rings, fixed (friction locking)

SAE USCAR36-1-2021 Dimensions and Performance Specifications for Aftermarket Gasoline Oil Filters

BE-NBN, standard for dimensions of oil tanks

NBN E 60-101-1973 T-groove dimensions, spacing, and accessories

NBN 885-05-1972 Dimensions and regulations for T-shaped grooves on projection welding machine platforms

American Society for Testing and Materials, Standard for the Dimensions of Oil Tanks

ASTM F1152-93 Standard Test Method for Groove Dimensions of Silicon Wafers

ASTM F1152-93 (2001) Standard Test Method for Groove Dimensions of Silicon Wafers

ASTM F870-94 (2005) Measurement of Tread Imprints and Dimensions of Bus Tire Grooves

International Electrotechnical Commission, Standards for the Dimensions of Oil Tanks

IEC 60471:1977 Dimensions of slot type connections for insulator string units

IEC 60471:1977/AMD1:1980 Dimensions of slot connections for insulator string units; Amendment 1

ZA-SANS, standard for the size of oil tanks

SANS 60471:1977 Dimensions of Insulator String Unit Slot Connection

PT-IPQ, standard for dimensions of oil tanks

E 335-1980 tiles - Flat tiles with grooves - Shape and dimensions

NP 1960-1985 seeders and cultivators - D1 groove type - Dimensions

Industry standard - Textile, standard for the size of oil tanks

FZ/T 90104-1999 Drawing Device Lower Groove Roller Dimensions

Local standards in Taiwan regarding the size of oil tanks

CNS 9727-1983 Shape and dimensions of groove rollers on ring spinning frames

European Committee for Standardization, standards for the dimensions of oil tanks

PREN 2049-1977 Aerospace series extruded aluminum alloy channel profiles - Dimensions

Cold formed aluminum alloy channel profiles for the prEN 2053-1977 aviation series - Dimensions

EN 3748:2001 Aerospace series - O-ring grooves - Dimensions

EN 2049:2001 Aerospace series - Extruded aluminum alloy channel profiles - Dimensions

EN 10365:2017 Hot rolled channel steel, I-type and H-type dimensions and masses

EN 3427:2006 Aerospace series - Groove dimensions for radial mounting fixed rings

EN 3426:2006 Aerospace series - Dimensions of grooves for shaft mounted external fixing rings

EN ISO 18388:2019 Technical Product Document (TPD) Overflow tank Type and size

Indonesian standard, regarding the size of oil tanks

SNI 05-1204-1989 Dimensions of T-groove threaded desktop machine tools

American Pipe Manufacturers Association, standard for dimensions of oil tanks

PFI ES-40-2004 Method for Dimensioning Grooved Pipe Assemblies

PFI ES-40-1994 Method for Dimensioning Grooved Pipe Components R (2000)

YU-JUS, standard for the size of oil tanks

JUS U.N5.160-1979 Sanitary ware - Washing sinks - Shape and dimensions

JUS B.M3.023-1980 Mining Support - Dimensions of Trough Reinforced Concrete Pillar

JUS M.F8.012-1990 Atomizing fuel injectors - Pump dimensions

JUS K.D2.034-1991 Indexable edge and face milling cutters (keyway) - Dimensions

JSAE - Society of Automotive Engineers of Japan @ Inc., Standards for the Dimensions of Oil Tanks

JASO E111-1993 Dimensions of Multi wedge Belt Wheel Grooves for Automotive Engines

JASO E109-2011 Automotive Parts - Dimensions of Multi wedge Pulley Grooves and Belts

AR-IRAM, standard for the size of oil tanks

Dimensions of canned products for IRAM 6004-1954 edible oil

IRAM 5157-1961 Dimensions of Hard Alloy Blades for Notching Pulleys into V-Shapes

Industry standard - Petroleum, standard for the size of oil tanks

SY/T 5698-1995 Nominal size of oil well tubing

SY/T 5795-1993 Installation dimensions and fitting dimensions of vulnerable parts for beam pumping units

ANSI - American National Standards Institute, standards for the size of oil tanks

INCITS/ISO 6986:1983 Dimensions of three sided edge milling (slot) cutters with indexable inserts

ASD-STAN - Aerospace and Defense Industries Association of Europe - Standardization, regarding the size standards of oil tanks

PREN 2336-1986 Steel spherical bearings with assembly grooves; Dimensions and loads

PREN 2588-1986 corrosion-resistant steel ball bearings with assembly grooves; Dimensions and loads

PREN 3748-2000 Aerospace series - O-ring groove dimensions (P 1 version)

PREN 3427-1991 Aerospace series - Groove dimensions for radial mounting retaining rings (Phase 1)

Industry standard - Coal, standard for the size of oil tanks

MT/T 864-2000 Scraper Conveyor Casting Channel Wall Types and Dimensions

MT/T 149-1987 Scraper conveyor hot rolled groove steel for mining purposes - Types and dimensions

ES-UNE, standard for the size of oil tanks

UNE-EN 3427:2006 Aerospace series - Groove dimensions for radial mounting retaining rings

UNE-EN ISO 18388:2019 Product Technical Document (TPD) Pressure Reducing Tank Types and Dimensions

UNE-EN 10365:2018 Dimensions and masses of hot-rolled channel steel, I-beam steel, and H-beam steel

CEN - European Committee for Standardization, regarding the size of oil tanks

PREN 16828-2015 Hot rolled channel steel I and H profiles - Dimensions and quality

SAE - SAE International, Standard for the Dimensions of Oil Tanks

SAE ARP58A-2004 Carburetor Envelope ARICRAFT - Size 58

SAE ARP59A-2004 Carburetor Envelope ARICRAFT - Size 78

KR-KS, standard for the size of oil tanks

KS B ISO